Stone Options

Reconstituted stone is a modern, sleek and functional option as a vanity bench top. The white of the stone is a beautiful contrast to the warmth of the timber. 

Our Tathra and Moama timber vanity designs come with a “Pearl White” top from Stone Ambassador. As each of our bathroom vanities are custom-made, we can add a stone top to any of our designs.

Aside from our standard “pearl white” colourway, you can select from the full Stone Ambassador and Caesarstone ranges however there may be an additional charge. All stone vanity top options are silica free.

What we need from you

Confirm the location of the centre point of the waste cutout for standard configurations.
Our standard configuration for the centre point for the waste cutout is found on the Moama and Tathra specification sheets. This changes depending if you have your basin centrally located or over a drawer. Confirm with your relevant trades what waste location is suitable for your bathroom.

Confirm the size of the basin cutout. 
The standard cutout size for a basin is 100mm. Confirm with the specification sheet for your basin that this size is suitable. You will need to advise us on the order form if you require a different diameter than the standard. If you are unsure, seek the advice of your trades. 

Provide a drawing for custom basin locations. 
If our standard basin location/s as per the specification sheet of the vanity design doesn’t work for your bathroom, we can customise the internals of your timber vanity as well as the stone top to suit your requirements. We will require you to provide us with a sketch showing the centre point of the waste cutout and the diameter of your waste and tap cutouts. Please see the link below for the custom waste location document. This will also be located in the order form. Refer to the specification sheets for your basin and tapware to find this information and seek the advice of your trades such as the plumber or builder. See the link below for an example.

Provide a drawing for the location and diameter of all tap cutouts.
Most often, clients place their taps centrally behind their basin or at 3 O’Clock or 9 O’Clock. We require a sketch of the location of all tap cutouts that includes the measurement to the centre point of the cutout and the diameter. The required minimum distance from the basin to the edge of the tap hole cutout is 60mm. You will need to confirm with the specification sheet for your tapware that this is suitable. If you are unsure, seek the advice of your trades such as the plumber or builder. See link below for an example.

Stone top options FAQ

  • Yes, as each of our timber vanities are made to order, we can alter any design to have a stone top. There will be an additional fee for adding a stone top to a timber vanity, contact us here (link to contact page) for a custom quote.

  • Yes, the stonemason can cut additional holes for taps coming out of the stone top. These tapholes need to be located a minimum of 50mm from the edge of the basin. The standard diameter for a tap cutout is 35mm however you will need to review the specification sheet for your specific tap for the cutout size and the required distance from the edge of the basin. You will need to provide a sketch of this information for us to include in your design drawings. There is an additional fee of $75 per tap cutout.

  • A single standard cutout is included in the price of our Moama and Tathra timber vanities. A standard cutout is for a top-mounted basin and is usually 100mm in diameter. You will need to refer to the specification sheet for the basin you have chosen and inform us of the required cutout size in the order form.

  • Included in the Tathra and Moama stone top vanities is a single standard cutout. Each additional tap or basin cutout is $75.

  • Yes, we can create our vanities to enable an under-mount basin. Under the basin will need to be either a cupboard or a “false front” drawer. You will need to provide us with the specification of the basin to ensure that we leave enough space under the bench top for the basin. Within the box of your basin will be a cutout template. We will require this cutout template to be sent to our workshop so we can provide this to the stone mason. There is a charge of $350 for each under-mount cutout.

  • We don’t supply stone bench tops for semi-undermount basins. Due to there often being discrepancies between the manufacturer's supplied template and the basin itself, you will need to source your own stone bench top if you want to use a semi-undermount basin. We can create the timber vanity to be ready for you to supply your own top.

  • We can create your timber vanity without a bench top so you can supply your own top.

  • A vanity located between 3 walls is complicated. You will need to seek the advice of your trades such as the builder, carpenter or plumber for the exact size the vanity needs to be. They will need to consider the allowance that enables the vanity to be slid into place with any gaps corked. We can supply the timber vanity without a stone top if your trades determine that it is simpler to have the bench top templated once the vanity is installed.